Trommel is a common screening equipment, the principle is the material from the feed port to the middle of the outlet of the screening process, the raw material into the trommel through the trommel after the slope and the screen, the trommel kept rotating To the effect of a transfer, and the screen is to play a screening effect, through such an uninterrupted process to classify the material.

Then the Trommel in the use of which common problems will be handled, how to solve it? The following look at the HSM mechanical problems and solutions.

First, the trommel in the use of a period of time later, to check the oil is not enough, this is to regularly check the added, otherwise it will burn the reducer.

Second, the discharge port conveyor belt is not out of the material or the operation is not smooth: the problem for a long time using the trommel, resulting in the mouth of the B-type belt relaxation slippage, lack of force caused by the need to adjust their own B-type triangle Can be solved;

Third, after the rain or sieve wet material when the trommel easy to use paste sieve: the general trommel machine after the rain and sieve wet material will appear when the phenomenon of paste sieve, this section of the screening machine specially designed sieve pumping structure, Forced to paste the sieve material to beat or install the hammer device, you can put the material down, the effect is very good.

If you have any question,please e-mail me:sales13@hsmmachinery.com