Mining Jigger machine belongs to gravity beneficiation equipment, which separates minerals based on different specific gravity.
Mining Jigger machine belongs to gravity beneficiation equipment, which separates minerals based on different specific gravity. Because of its large capacity, wide range of particle’s separating , simple operation and maintenance, it is widely used for separating gold, tin, titanium, iron, coal and other minerals, especially manganese ore.Recently diaphragm jig is the most popular type in metal ore separating area.
Jigger machine can be divided into bottom pulsation diaphragm jigger and side pulsation diaphragm jigger according to the different diaphragm position of machine, and based on size of particles,machine can be divided into coarse-particles jigger and fine-particles jigger.
1. High capacity;
2. High concentration ratio and high recovery;
3. Fabricated with highest quality material;
4. Easy to install, operate and maintain;
5. The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling;
6. Saving water 30-40% than ordinary jig;
7. The pulsation speed very easy adjusted by regulator;
8. Suitable for roughing and desliming.
Model | Area jig | Stroke | Stroke | Feed size | Hutch | Pressure | Capacity | Power | Overrall | Weight |
JT0.57-1 | 0.57 | 8.5-12 | 60-160 | < 6 | 1-2 | ≥ 0.3 | 1-2.5 | 1.5 | 1560×820 | 0.612 |
JT1-1 | 1.04 | 8.5-12 | 60-160 | < 10 | 2-3 | ≥ 0.3 | 4-10 | 2.2 | 1322×1190 | 0.9 |
JT2-2 | 2.28 | 8.5-12 | 60-160 | < 10 | 2-4 | ≥ 0.3 | 8-15 | 3 | 3225×1550 | 1.637 |
JT3-1 | 3.3 | 10-47 | 80-110 | < 20 | 3-6 | ≥ 0.1 | 10-15 | 5.5 | 2662×2000 | 3.26 |
JT4-2 | 4 | 7-30 | 50-125 | < 10 | 4-8 | ≥ 0.1 | 8-16 | 7.5 | 4240×1990 | 4.6 |
JT4-2A | 4 | 7-30 | 50-125 | < 10 | 4-8 | ≥ 0.1 | 8-16 | 4 | 4240×1990 | 4.6 |
JT5-2 | 4.86 | 15-25 | 80-120 | < 10 | 4-10 | ≥ 0.1 | 10-20 | 7.5 | 3940×2006 | 4.8 |